Start of manufacturing of aluminum EOE (Easy Open End)

Developed tinplate EOE

Commercialized full-scale production of aluminum 2-piece can

Commercialized multi-layer plastic tubes

Started the world's first commercial production of two-piece steel cans.

Commercialize pull-up caps

Started manufacturing 3-piece welded cans for beverages

Developed and commercialized liquid nitrogen filling technology

Commercialized peel-off caps

Commercialized heat-seal end caps

Commercialize the squeeze foamer

Commercialization of aseptic filling equipment for black coffee cans

Established technology for producing aluminum DRD cans with simplified production processes.

Developed and commercialized the internal pressure can SOT (Stay-on Tab End).

Developed a system to eliminate the need for acoustic inspection of 3-piece cans using an in-line super detector.

Commercialized coil coating for 3-piece can bodies

Commercialized one-piece molded hot cans

Developed and commercialized SOT for negative pressured cans.

Developed new can washer with high efficiency and short processing time.

Developed new high-speed visual inspection machine for inspection of outer appearane of cans

Developed pre-printed DR cans using a printing pattern deformation technology based on strain analysis.

Commercialized smooth caps.

Commercialized pump foamers.

Developed a campaign-specific SOT (Stay-On Tab) for promoting beverage can sales.

Commercialized a pilfer-proof cap.

Developed and commercialized a 3-piece double-neck can (190g and 250g).

Developed and commercialized laminated 3-piece cans that significantly improve product quality.

Developed and commercialized 204/211 reduced-diameter cans.

Installed a laminating line at the Shin Tobata Plant and began full-scale operation.

Commercialization of L-tube

Obtained ISO9002 certification

Launched the ASIS No. 1 line and began a joint venture with Toas Co., Ltd.

Developed and commercialized hologram cans

New Bottle Can development and commercialization

The New Bottle Can won the Grand Prix for Can of the Year at Canex 2000, hosted by The Canmaker (magazine).

Developed and commercialized small PET bottle compatible with hot warmers.

Developed and commercialized New Bottle Can for retort

Developed and commercialized solid aseptic technology.

Developed and commercialized the Elegance Can.

Developed and commercialized the Spiral Bead Can

The Spiral Bead Can, won the Grand Prix for Can of the Year for the second time at Canex 2003, hosted by The Canmaker.

Developed and commercialized flat tubes.

Developed and commercialized the Mini Bottle Can

Developed and commercialized 3-piece wide-mouth resealable can (Wide Open Resealable Can).

The Mini Bottle Can won the Bronze Award in the Can of the Year (Bottle Can Category) at Cannex 2005, hosted by The Canmaker (magazine).

The New Bottle Can won the 2005 French Packaging Award, presented by a French packaging industry magazine.

Developed an aerosol cap with a content discharge mechanism (residual gas discharge mechanism).

At the Cannex 2006, hosted by The Canmaker (magazine), the Wide-Open Resealable Can won the Grand Prix in the 3-piece beverage can category, and the Chocolate Can won the Silver Award in the 2-piece food can category.

Developed and commercialized tablet cans

Developed and commercialized retort cups

In the Can of the Year awards hosted by The Canmaker (magazine), the foamedink laminated can won the gold prize and the grip can won the silver prize in the 3-piece can beverage category. In addition, the Wide-Open Resealable Can won the silver prize in the 3-piece food can category, and the small AE tablet can won the silver prize in the 2-piece food can category.

At the "International Steel Packaging Awards" hosted by APEAL (Steel for Packaging Europe), the Wide-Open Resealable Can won the top prize in the beverage can category

Development and commercialization of a New Bottle Can for wine.

Developed the ECO Bead Can (3-piece 190g environmentally friendly steel can)

The expanded irregular shaped can won the Bronze Award at the 2009 Can of the Year Awards.

Developed Lapilus, a new eco-friendly material.

Received awards in 3 categories at the 2010 Can of the Year Awards:- Gold Award in the 3-Piece Beverage Can Category (24-sided expanded can)

Gold prize for the Bottle Can Category (Film laminated 120ml Mini Bottle Can)

Silver Award in the 3-Piece Beverage Can Category (gravure laminate hologram printing)

2011 Can of the Year Awards:- Silver Award in the 3-Piece Beverage Can category (3P-ECO Bead Can)

Bronze Award / Summit Attendee Award in the Bottle Can category (Slim Wine Bottle)

Received the 15th Japan Food Products Excellence Award for Machinery, Materials, and Ingredients (New Bottle Can for Wine, Slim Wine Bottle)

Received two awards at the 2012 Can of the Year Awards: Gold Award in the 3-Piece Beverage Can category / Summit Attendee Award (3-Piece Expandable Can)

In collaboration with the National Institute of Advanced Industrial Science and Technology, developed a new anti-fogging coating with a new mechanism

Received the Silver Award in the 3-Piece Beverage Can category at the 2013 Can of the Year Awards (3-piece long neck can).

Can of the Year Grand Prix Winner- Gold Award Winner in the 3-Piece Beverage Can Category (3-Piece Embossed Can)

Bronze Award Winner in the Bottle Can Category (Embossed Bottle Can)

Gold Award in the 3-Piece Beverage Can Category (3-Piece Expanded Can)

Gold Award in the Bottle Can Category (Contour Bottle Can)

Received the Silver Award in the Concept category at the "Pentaward 2017"

Developed and commercialized a thin tube compatible with postal mail (mail delivery).

Developed and commercialized a tube for spot care

Developed and commercialized an oil-repellent film for confectionery

Gold Award (CL-WORC)

Bronze Award (Can body/end inner surface BPA-NI specification)